Cartridges for a length

Code-Snippets

curl "https://api.oanor.com/caulk-api/v1/tubes" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/caulk-api/v1/tubes", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/caulk-api/v1/tubes");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/caulk-api/v1/tubes",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "note": "Cartridges = (length × waste factor) ÷ feet per cartridge, rounded up. A wider bead, a deeper joint or backer rod all use more. Tooling the bead and a stop-start job waste a little, so the 10 % allowance is sensible.",
        "inputs": {
            "length_ft": 100,
            "cartridge_oz": 10.1,
            "bead_width_in": 0.25,
            "waste_percent": 10
        },
        "cartridges_needed": 4,
        "linear_feet_per_cartridge": 30.9
    },
    "meta": {
        "timestamp": "2026-06-06T15:30:49.514Z",
        "request_id": "c719f1f0-8652-45c7-946a-c81983a21927"
    },
    "status": "ok",
    "message": "Cartridges needed",
    "success": true
}