Spec

Extraits de code

curl "https://api.oanor.com/hvacload-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/hvacload-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/hvacload-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/hvacload-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Exemple de réponse

Une réponse réelle de ce endpoint, capturée lors du dernier contrôle de santé.

{
    "data": {
        "notes": "US units (CFM, °F, grains/lb, BTU/hr). Qs = 1.08·CFM·ΔT; Ql = 0.68·CFM·Δgrains; total = 4.5·CFM·Δh; CFM = Qs/(1.08·ΔT). Standard-air factors — adjust for altitude. For room rule-of-thumb sizing use an HVAC API; for moist-air properties a psychrometric API.",
        "service": "hvacload-api",
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/latent": "Latent heat from CFM and the humidity-ratio difference (grains).",
            "GET /v1/airflow": "Airflow (CFM) required for a sensible load at a ΔT.",
            "GET /v1/sensible": "Sensible heat (BTU/hr, tons, kW) from CFM and ΔT."
        },
        "description": "HVAC air-side heat maths: sensible and latent heat from an airflow, and the airflow needed for a sensible load."
    },
    "meta": {
        "timestamp": "2026-06-07T08:18:02.334Z",
        "request_id": "b0bcadec-5c01-4765-8071-9ae188cb6005"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}