Spec

Extraits de code

curl "https://api.oanor.com/suspension-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/suspension-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/suspension-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/suspension-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Exemple de réponse

Une réponse réelle de ce endpoint, capturée lors du dernier contrôle de santé.

{
    "data": {
        "notes": "US units (lb/in, lb). wheel = spring × MR²; f = (1/2π)√(k·g/W) with g = 386 in/s²; spring = (2πf)²·W/g ÷ MR². Consistent metric (N/mm, kg with g = 9810 mm/s²) also works for wheel-rate. Estimates — real ride depends on damping and tyres too.",
        "service": "suspension-api",
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/frequency": "Ride frequency from wheel rate and corner sprung weight.",
            "GET /v1/wheel-rate": "Wheel rate = spring rate × motion ratio².",
            "GET /v1/spring-rate": "Spring rate needed for a target ride frequency."
        },
        "description": "Vehicle-suspension maths: wheel rate from spring rate and motion ratio, the ride (natural) frequency, and the spring rate for a target frequency."
    },
    "meta": {
        "timestamp": "2026-06-06T23:54:02.440Z",
        "request_id": "17142c79-968e-433d-8098-a08b6c016be6"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}