oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /antenna-api

Antenna Length API

salutare 3,063 Abbonati

Antenna length maths as an API, computed locally and deterministically. The dipole endpoint gives the total and per-leg length of a half-wave dipole for a frequency, in metres, feet, inches and centimetres, applying a velocity factor (about 0.95 for wire) and also reporting the classic 468 ÷ f(MHz) feet rule of thumb. The quarterwave endpoint gives the element length of a quarter-wave vertical or monopole, with the 234 ÷ f(MHz) rule. The element endpoint computes the length of an element at any fraction of a wavelength — full-wave, half-wave, quarter-wave, fifth-wave, five-eighths or a custom fraction. Frequencies accept Hz, kHz, MHz and GHz, and the velocity factor is configurable. Everything is computed locally and deterministically, so it is instant and private. These are starting lengths: real antennas need trimming and tuning for the lowest SWR, as end effects and surroundings shift the resonant length. Ideal for amateur-radio and RF tools, antenna and IoT design, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is antenna geometry; for general wavelength, frequency and photon energy use a wavelength API.

#antenna #dipole #amateur-radio #rf #frequency #developer-tools
api.oanor.com/antenna-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/antenna-api/openapi.json
/api/antenna-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
88 ms
Sondaggi del server · 24 ore su 24
Abbonati
3,063
attiva
Chiamate totali
40
ultimi 7 giorni
status Pagina di stato completa → · 24 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 11,735 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 11,735 calls/month
  • 2 req/sec
  • Dipole + quarter-wave + element
  • No credit card
Accedi per abbonarti

Starter

€13.25 /mese

  • 21,350 chiamate/mese
  • 8 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 21.35k llamadas/mes
  • 8 req/seg
  • Factor de velocidad + m/ft/in
  • Soporte por correo electrónico
Accedi per abbonarti

Pro

€33.15 /mese

  • 263,500 chiamate/mese
  • 20 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 263.5k llamadas/mes
  • 20 req/seg
  • Tuberías de diseño de RF / antena
  • Soporte prioritario
Accedi per abbonarti

Mega

€71.15 /mese

  • 1,360,000 chiamate/mese
  • 50 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.36M llamadas/mes
  • 50 req/seg
  • Escala de plataforma
  • SLA dedicado
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

VSWR & Impedance Match API

VSWR and RF impedance-matching maths as an API, computed locally and deterministically. The vswr endpoint computes the voltage standing-wave ratio and its companion figures — the reflection coefficient Γ = (ZL − Z0)/(ZL + Z0) = √(Pr/Pf), the VSWR = (1+|Γ|)/(1−|Γ|), the return loss −20·log₁₀|Γ| dB, the mismatch loss and the percentage of power reflected and transmitted — from a reflection coefficient, a load and source impedance (Z0 default 50 Ω), or the forward and reflected power. The fromvswr endpoint goes the other way, deriving Γ, return loss and the power split from a VSWR figure. The power endpoint computes the reflected and transmitted power from a forward power and a VSWR or reflection coefficient. Everything is computed locally and deterministically, so it is instant and private. Ideal for RF, antenna, amateur-radio and wireless app developers, antenna-tuning and feedline tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is RF impedance match; for antenna gain and aperture use an antenna API.

api.oanor.com/vswr-api

Maidenhead Locator API

Convert between latitude/longitude and the Maidenhead Locator System — the grid-square "QTH locator" (like JN58td or IO91wm) used by amateur radio, APRS and contesting to describe a position compactly. The encode endpoint turns a latitude and longitude into a locator at 4-, 6-, 8- or 10-character precision. The decode endpoint turns a locator back into the centre coordinates, the south-west corner and the size of the grid square. The distance endpoint gives the great-circle distance (kilometres and miles) and bearing between the centres of two locators — the classic "how far and which way is that station". Everything is computed locally and deterministically, so it is instant and private. Ideal for amateur-radio and APRS tools, contest logging, antenna aiming, and grid-based mapping. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is the Maidenhead system; for Plus Codes, MGRS, UTM and DMS use a geo-convert API and for precise geodesic distance use a geodesy API.

api.oanor.com/maidenhead-api

Transmission Line API

Transmission-line RF maths as an API, computed locally and deterministically for a lossless line. The input-impedance endpoint transforms a complex load impedance along a line, Zin = Z0·(ZL + jZ0·tanβl)/(Z0 + jZL·tanβl), from the characteristic impedance, the load resistance and reactance and the electrical length in degrees — a quarter-wave (90°) line inverts the load to Z0²/ZL while a half-wave (180°) line repeats it, which is the basis of impedance matching. The quarter-wave endpoint computes the characteristic impedance Z0 = √(Z1·Z2) of a quarter-wave transformer that matches two real impedances, exact at one frequency. The electrical-length endpoint converts a physical line length to its electrical length in wavelengths, degrees and radians at a frequency, using the on-line wavelength λ = vf·c/f with a velocity factor for the dielectric. Impedances are in ohms (the load split into resistance and reactance), electrical length in degrees, physical length in metres and frequency in hertz. Everything is computed locally and deterministically, so it is instant and private. Ideal for RF, antenna-matching, PCB, radar and microwave app developers, stub-matching and transformer-design tools, and electromagnetics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is line impedance transformation; for SWR and return loss use a VSWR API and for microstrip trace geometry a PCB API.

api.oanor.com/transmissionline-api

Waveguide API

Rectangular-waveguide microwave maths as an API, computed locally and deterministically. The cutoff endpoint computes the cutoff frequency fc = (c/2)·√((m/a)²+(n/b)²) and cutoff wavelength of any TEmn or TMmn mode of a rectangular waveguide of inner width a and height b — below the cutoff a mode is evanescent and cannot propagate, and for the usual a > b the dominant mode is TE10 with fc = c/(2a). The guide-wavelength endpoint computes, at an operating frequency, the free-space wavelength, the guide wavelength λg = λ0/√(1−(fc/f)²) which is longer than free space, and the phase velocity (greater than c) and group velocity (the energy speed, below c). The modes endpoint lists every mode that propagates at a given frequency, sorted by cutoff, and identifies the dominant mode — so single-mode operation needs the frequency between the first and second cutoffs. Dimensions are in millimetres and frequencies in gigahertz, with c = 299,792,458 m/s. Everything is computed locally and deterministically, so it is instant and private. Ideal for RF, microwave, radar, satellite and antenna-feed app developers, waveguide-band and component-design tools, and electromagnetics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is metallic rectangular waveguide; for optical-fibre guiding use a fibre API and for SWR a VSWR API.

api.oanor.com/waveguide-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Antenna Length API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Antenna Length API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Antenna Length API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Antenna Length API?
Antenna Length API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €13.25 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Antenna Length API è conforme al GDPR?
Tutte le richieste a Antenna Length API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/antenna-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/antenna-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/antenna-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/antenna-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.