oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /candytemp-api

Candy Temperature API

salutare 4,923 Abbonati

Candy-making maths as an API, computed locally and deterministically — the sugar-syrup stage numbers a confectioner reads a thermometer by. As sugar syrup boils it passes through named stages, each a temperature window with its own texture and uses, and getting within a few degrees is the difference between fudge and toffee. The stage endpoint names the stage for a temperature: 238 °F is the soft-ball stage (fudge, fondant, pralines), 305 °F is hard-crack (toffee, brittle, lollipops), and it handles °F or °C and the off-the-chart cases — still a thin syrup below thread, or darkening to burnt past caramel. The range endpoint gives the temperature window and uses of a named stage, from thread (223–234 °F) through soft-ball, firm-ball, hard-ball, soft-crack and hard-crack to caramel (320–350 °F), in both °F and °C. The altitude endpoint applies the rule that matters in the mountains: cook to 1 °F lower for every 500 feet of elevation, since water boils cooler, so a 300 °F hard-crack recipe is done at 290 °F at 5,000 feet. Everything is computed locally and deterministically, so it is instant and private. Ideal for baking, confectionery, recipe and kitchen app developers, candy-thermometer and timer tools, and cooking-class software. Pure local computation — no key, no third-party service, instant. Use a calibrated thermometer. Live, nothing stored. 3 compute endpoints.

#candy #confectionery #baking #cooking #sugar #developer-tools
api.oanor.com/candytemp-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/candytemp-api/openapi.json
/api/candytemp-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
69 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,923
attiva
Chiamate totali
0
ultimi 7 giorni
status Pagina di stato completa → · 4 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 7,080 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 7.080 Aufrufe/Monat
  • 2 req/sec
  • Stage + Reichweite + Höhenanpassung
  • Keine Kreditkarte
Accedi per abbonarti

Starter

€4.13 /mese

  • 57,100 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 57.100 Aufrufe/Monat
  • 6 req/sec
  • °F/°C, alle sieben Stufen, Höhenregel
  • E-Mail-Support
Accedi per abbonarti

Pro

€11.38 /mese

  • 238,800 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 238.800 Aufrufe/Monat
  • 15 req/sec
  • Recipe & candy-thermometer pipelines
  • Priority-Support
Accedi per abbonarti

Mega

€36.08 /mese

  • 1,364,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.364.000 Aufrufe/Monat
  • 40 req/sec
  • Plattform-Skalierung
  • Dedizierte SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Baking Pan Scaler API

Baking-pan maths as an API, computed locally and deterministically — the area and scale-factor numbers a baker resizes a recipe between pans with. The trick everyone gets wrong is that a recipe scales by the pan’s AREA, not its diameter, so a 10-inch round holds far more batter than a 9-inch. The area endpoint gives the surface area of any pan — round and springform as π/4·d², square as s², rectangle as length × width, and bundt or tube pans as the ring (the outer circle minus the centre hole) — so a 9-inch round is 63.6 in², an 8-inch square 64 and a 9×13 is 117; add a depth and it returns the volume in cubic inches and cups. The convert endpoint gives the scale factor to move a recipe from one pan to another, factor = target area ÷ source area: a 9-inch round to a 9×13 is ×1.84, and two 8-inch rounds really do equal one 9×13. Pass an ingredient amount and it scales it for you, with a note to keep the batter depth similar and adjust the bake time. Everything is computed locally and deterministically, so it is instant and private. Ideal for baking, recipe, meal-prep and kitchen app developers, recipe-scaling and substitution tools, and culinary software. Pure local computation — no key, no third-party service, instant. Inches. Live, nothing stored. 2 compute endpoints. For ingredient unit conversion use a cooking API.

api.oanor.com/panscale-api

Dough Calculator API

Pizza and bread dough maths as an API, built on baker's percentages — where the flour is always 100% and every other ingredient is expressed as a percentage of the flour weight. The dough endpoint computes a full recipe in grams (flour, water, salt, yeast, oil and sugar) from a target quantity — either a number of dough balls and a ball weight, a total dough weight, or a flour weight — together with a hydration and salt/yeast percentages, or a built-in style preset (Neapolitan, New York, Detroit, Sicilian, focaccia, ciabatta, baguette, sandwich). The hydration endpoint converts between flour, water and hydration percentage and classifies the dough from stiff to extremely wet. The presets endpoint returns the common dough styles as baker's percentages with typical ball weights. Everything is computed locally and deterministically, so it is instant and private. The yeast figure is instant dry yeast (use roughly three times as much fresh). Ideal for recipe and baking apps, pizzeria and bakery tools, meal-planning and kitchen-scale integrations, and food blogs. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is dough formulation by baker's percentage; for ingredient volume-to-weight and oven-temperature conversion use a cooking API.

api.oanor.com/dough-api

Home Canning API

Home-canning maths as an API, computed locally and deterministically — the altitude adjustments that keep a batch of preserves safe, the numbers a canner, homesteader or recipe app processes a jar by. Because water boils cooler the higher you are, every tested sea-level recipe has to run longer or hotter, and this API does that arithmetic. The waterbath endpoint applies the USDA boiling-water-bath and steam-canner rule: for a base process of 20 minutes or less add 5, 10, 15 or 20 minutes by altitude band, and for more than 20 minutes add 10, 20, 30 or 40 — so a 15-minute pickle recipe at 4,000 feet processes 25 minutes, and a 30-minute one runs 50. The pressure endpoint adjusts the canner: a dial gauge gains 1 psi per 2,000 feet, turning an 11 psi recipe into 12, 13, 14 or 15, while a weighted gauge simply steps from 10 psi up to 1,000 feet to 15 above it, since it only has 5/10/15 settings. The boilingpoint endpoint gives the underlying reason — water boils about 1.84 °F lower per 1,000 feet, so 5,000 feet boils at 202.8 °F instead of 212. Everything is computed locally and deterministically, so it is instant and private. Ideal for canning, food-preservation, homesteading, recipe and kitchen app developers, preserving-calculator and pantry tools, and cooking-class software. Pure local computation — no key, no third-party service, instant. USDA tables — always follow a tested recipe. Live, nothing stored. 3 compute endpoints.

api.oanor.com/canning-api

Cooking API

Recipe and kitchen conversions as an API. Convert between volume units (teaspoon, tablespoon, cup, fl-oz, ml, litre, pint, quart, gallon) and between mass units (gram, kilogram, ounce, pound) — and, crucially, between volume and mass for a specific ingredient using its density, so 1 cup of all-purpose flour ≈ 125 g, 1 cup of granulated sugar ≈ 200 g and 1 cup of water ≈ 237 g. 30 common ingredients are built in (flours, sugars, butter, oils, honey, rice, oats, cocoa, cornstarch and more), each with its grams-per-cup. Perfect for recipe apps, scaling and "metric vs cups" conversion, shopping lists and meal-prep tools. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. Distinct from general physical unit conversion, which has no ingredient densities.

api.oanor.com/cooking-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Candy Temperature API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Candy Temperature API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Candy Temperature API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Candy Temperature API?
Candy Temperature API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €4.13 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Candy Temperature API è conforme al GDPR?
Tutte le richieste a Candy Temperature API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/candytemp-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/candytemp-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/candytemp-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/candytemp-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.