Spec

Frammenti di codice

curl "https://api.oanor.com/drywall-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/drywall-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/drywall-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/drywall-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Risposta di esempio

Una risposta reale di questo endpoint, acquisita dall'ultimo health check.

{
    "data": {
        "notes": "Area in m² (or perimeter × height, or length × width). Default sheet 2.4 × 1.2 m. Compound/tape factors are industry averages — adjust for your product and number of coats.",
        "service": "drywall-api",
        "formulae": {
            "screws": "sheets × screws_per_sheet",
            "sheets": "ceil(area·(1+waste) / sheet_area)",
            "compound": "area × kg_per_m2,  tape = area × m_per_m2"
        },
        "endpoints": {
            "GET /v1/cost": "Project cost from sheets, compound and tape.",
            "GET /v1/meta": "This document.",
            "GET /v1/sheets": "Sheets and screws for a wall/ceiling area, with a waste allowance.",
            "GET /v1/compound": "Joint compound (kg) and tape (m) for the boarded area."
        },
        "description": "Drywall / plasterboard estimator: sheets and screws for an area, joint compound and tape, and project cost."
    },
    "meta": {
        "timestamp": "2026-06-04T18:38:17.383Z",
        "request_id": "4ca2b2ee-d799-413b-a345-ab0c08f12451"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}