Spec

Frammenti di codice

curl "https://api.oanor.com/rivet-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/rivet-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/rivet-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/rivet-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Risposta di esempio

Una risposta reale di questo endpoint, acquisita dall'ultimo health check.

{
    "data": {
        "notes": "mm, MPa in; N out. shear = (π/4·d²)·τ·count·planes; bearing = d·t·σ·count; rivets = ceil(load/(area·τ·planes)). Joint strength is the lesser of shear and bearing; check edge tear-out separately. For bolt preload/torque use a bolt-torque API; for thread geometry a thread API.",
        "service": "rivet-api",
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/shear-capacity": "Shear capacity from rivet diameter, shear strength, count and planes.",
            "GET /v1/rivets-required": "Rivets needed for a load at an allowable shear stress.",
            "GET /v1/bearing-capacity": "Bearing capacity from diameter, plate thickness and bearing strength."
        },
        "description": "Riveted-joint maths: shear capacity of a rivet group, bearing capacity at the plate, and rivets required for a load."
    },
    "meta": {
        "timestamp": "2026-06-07T08:17:55.616Z",
        "request_id": "a863c775-4574-44c4-b1c1-603ae404c482"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}