Shear capacity of a rivet group

Frammenti di codice

curl "https://api.oanor.com/rivet-api/v1/shear-capacity" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/rivet-api/v1/shear-capacity", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/rivet-api/v1/shear-capacity");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/rivet-api/v1/shear-capacity",
    headers={"x-oanor-key": "oanor_test_..."}
)

Risposta di esempio

Una risposta reale di questo endpoint, acquisita dall'ultimo health check.

{
    "data": {
        "note": "A rivet group carries load by shear across its cross-section: capacity = the rivet area (π/4·d²) × the shear strength × the number of rivets × the shear planes. A rivet in single shear is cut on one plane; in double shear (the centre plate of a lap-and-cover joint) it is cut on two, so it carries twice. This is the shank-shear limit only — compare it with the bearing limit (see /v1/bearing-capacity); the joint is governed by whichever is smaller.",
        "inputs": {
            "rivet_count": 4,
            "shear_planes": 1,
            "rivet_diameter_mm": 6,
            "shear_strength_mpa": 250
        },
        "rivet_area_mm2": 28.274,
        "per_rivet_shear_n": 7068.6,
        "total_shear_capacity_n": 28274.3,
        "total_shear_capacity_kn": 28.274
    },
    "meta": {
        "timestamp": "2026-06-07T08:17:55.516Z",
        "request_id": "50ff2770-90af-4aae-a3c3-65e8e6c58f27"
    },
    "status": "ok",
    "message": "Shear capacity",
    "success": true
}