oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /spokelength-api

Spoke Length & Wheel API

salutare 4,173 Abbonati

Bicycle wheel-building maths as an API, computed locally and deterministically — the spoke-length and tension numbers a wheelbuilder laces a wheel by. The spoke endpoint runs the classic spoke-length formula from the hub and rim geometry: L = √(R² + r² + f² − 2·R·r·cos θ) − hole ÷ 2, where R is half the effective rim diameter (ERD), r is half the hub flange diameter, f is the centre-to-flange offset and θ = crosses × 720° ÷ spokes — so a 602 mm ERD rim on a 45 mm flange at 35 mm offset, 32 spokes laced 3-cross (a 67.5° crossing angle), needs a 293.9 mm spoke. It handles radial (0-cross) builds and computes the drive and non-drive sides separately from their own offsets, since a dished wheel’s two sides differ. The bracing endpoint gives each side’s bracing angle = atan(offset ÷ (ERD/2)) — the lever that resists side loads — and the resulting tension ratio, because the side with the smaller offset must carry higher tension, which is why a rear wheel’s non-drive spokes (often only about half the drive-side tension) go slack first. Everything is computed locally and deterministically, so it is instant and private. Ideal for bike-shop, wheelbuilding, cycling and bike-fit app developers, spoke-calculator and build-sheet tools, and component-database software. Pure local computation — no key, no third-party service, instant. Millimetres. Live, nothing stored. 2 compute endpoints. For gear inches or gearing use a bicycle-gear API.

#cycling #wheelbuilding #spoke #bike #bike-shop #developer-tools
api.oanor.com/spokelength-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/spokelength-api/openapi.json
/api/spokelength-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
83 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,173
attiva
Chiamate totali
3
ultimi 7 giorni
status Pagina di stato completa → · 6 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 6,900 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 6.900 Aufrufe/Monat
  • 2 req/sec
  • Speichenlänge + Verstrebung + Spannungsverhältnis
  • Keine Kreditkarte
Accedi per abbonarti

Starter

€4.35 /mese

  • 54,500 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 54.500 Aufrufe/Monat
  • 6 req/sec
  • Antriebs-/Nichtantriebsseiten, radial, beliebiger Querschnitt
  • E-Mail-Support
Accedi per abbonarti

Pro

€12.00 /mese

  • 226,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 226.000 Aufrufe/Monat
  • 15 req/sec
  • Spoke-calculator & build-sheet pipelines
  • Priority-Support
Accedi per abbonarti

Mega

€38.00 /mese

  • 1,330,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.330.000 Aufrufe/Monat
  • 40 req/sec
  • Plattform-Skalierung
  • Dedizierte SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Bicycle Gear API

Bicycle gearing maths as an API, computed locally and deterministically. The gear endpoint takes a chainring and cog tooth count and a wheel size and returns every common gearing metric: the gear ratio, gear inches (the classic measure — ratio times wheel diameter in inches), the gain ratio (Sheldon Brown's crank-length-aware measure), the development or rollout (metres travelled per crank revolution), and the road speed at a chosen cadence in km/h and mph. The speed endpoint converts between a gear-and-cadence and road speed in either direction — the speed at a cadence, or the cadence needed for a target speed. The table endpoint builds a gear chart: give one or more chainrings and a cassette of cogs and it returns a matrix of gear inches, development, gain ratio or ratio for every combination — ideal for visualising a drivetrain. Wheel size can be a preset (700x25c, 26-inch, 29er and more) or an exact rolling circumference in millimetres, and crank length is configurable for the gain ratio. Everything is computed locally and deterministically, so it is instant and private. Ideal for cycling apps and bike-fit tools, drivetrain and gear-ratio planners, and bike-shop and component sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is bicycle gearing; for cycling power, FTP and training zones use a cycling API.

api.oanor.com/bikegear-api

API de rendimiento ciclista

Matemáticas de rendimiento ciclista como API. El endpoint de potencia estima la potencia en vatios necesaria para pedalear a una velocidad dada en una pendiente determinada, a partir de un modelo físico — resistencia a la rodadura, gravedad en la subida y arrastre aerodinámico — con valores predeterminados sensatos que puedes anular (coeficiente de resistencia a la rodadura, área de arrastre CdA, densidad del aire, eficiencia de la transmisión y viento en contra), y desglosa la potencia en sus componentes de rodadura, gravedad y aerodinámica, además de vatios por kilogramo. El endpoint ftp-zones convierte una Potencia Funcional Umbral en las siete zonas de entrenamiento de Coggan, desde recuperación activa hasta potencia neuromuscular, como rangos de vatios. El endpoint vam calcula el VAM — metros de ascenso vertical por hora, la métrica de velocidad de escalada — ya sea a partir de la elevación ganada y el tiempo, o de la velocidad y la pendiente. Todo se calcula local y determinísticamente, por lo que es instantáneo y privado. Ideal para aplicaciones de ciclismo y entrenamiento, ordenadores de bicicleta y herramientas de medidores de potencia, entrenamiento, y análisis de rutas y subidas. Cálculo local puro — sin clave, sin servicio de terceros, instantáneo. En vivo, nada almacenado. 4 endpoints. Esto son matemáticas de ciclismo; para ritmo de carrera usa una API de ritmo y para zonas de frecuencia cardíaca de entrenamiento usa una API de frecuencia cardíaca.

api.oanor.com/cycling-api

Aquascape API

Pflanzenaquarium- und Aquascaping-Mathematik als API, lokal und deterministisch berechnet – die Dosis- und Wasserwerte, auf denen ein High-Tech-Pflanzentank läuft, nicht die Würfel eines Spiels. Der CO2-Endpunkt gibt die gelöste CO2-Konzentration aus pH und Karbonathärte unter Verwendung der klassischen Beziehung CO2 (ppm) ≈ 3 × KH (dKH) × 10^(7 − pH) und kennzeichnet sie gegenüber dem von Pflanzen gewünschten Fenster von 15–30 ppm – bei pH 6,6 und KH 4 liegen Sie bei etwa 30 ppm, dem oberen Ende der sicheren Zone, während pH 7,0 und KH 3 ein kohlenstofflimitiertes 9 ppm ergeben. Der Dünger-Endpunkt wandelt eine Trockensalzdosis in den Nährstoff-ppm, den sie hinzufügt, das Herz der Estimative-Index-Dosierung: ppm = Gramm × Nährstoffmassenanteil × 1000 ÷ Tankliter, also fügt 1 g KNO3 in 100 Litern 6,1 ppm Nitrat und 3,9 ppm Kalium hinzu, und er kennt KNO3, KH2PO4, K2SO4, MgSO4 (Bittersalz) und Ca(NO3)2. Der Substrat-Endpunkt dimensioniert das Substrat aus Grundfläche und Zieltiefe – ein 60 × 30 cm Tank bei 6 cm Tiefe benötigt 10,8 Liter, zwei 9-Liter-Aquasoil-Beutel. Alles wird lokal und deterministisch berechnet, also ist es sofort und privat. Ideal für Aquascaping- und Pflanzentank-Apps, Düngerrechner, CO2-Anlagen-Tools sowie Aquariengeschäfts- und Hobbyseiten. Reine lokale Berechnung – kein Key, kein Drittanbieterdienst, sofort. Live, nichts gespeichert. 3 Compute-Endpunkte. Für ein Tankwasservolumen oder Fischbesatz verwenden Sie eine Aquarium-API; für Poolchemie verwenden Sie eine Pool-API.

api.oanor.com/aquascape-api

Reptile Husbandry API

Reptile-husbandry maths as an API, computed locally and deterministically — the keeper numbers behind a healthy vivarium, so the setup is right before the animal moves in. The enclosure endpoint turns an animal length and its habit into the minimum floor length, width and height: terrestrial snakes want a floor at least as long as the snake (a 48-inch corn snake → a 48 × 24 × 24 inch minimum, eight square feet of floor), arboreal species trade floor for height (an 18-inch chameleon → 27 × 18 × 36 inches, tall), and ground lizards and tortoises need far more floor than their body length. The uvb endpoint gives the UV-B target by Ferguson zone — the 1-to-4 classification from Baines et al. (2016) of how much sun a species basks in — returning the mean and basking UV-index ranges (zone 3 open baskers want a basking UVI of 2.9–7.4), and, if you pass a lamp UVI measured at a reference distance, an inverse-square estimate of the mounting distance for the right basking UVI. The feeding endpoint sizes prey from body weight and life stage: a meal of roughly 10–15 % of body weight, no wider than the animal, on an interval that lengthens with age — a 500 g adult snake takes a 40–60 g prey item every fortnight. Everything is computed locally and deterministically, so it is instant and private. Ideal for reptile-keeper and herpetoculture apps, pet-store and breeder tools, vivarium-planning calculators, and care-sheet sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. Educational husbandry estimates — not veterinary advice; research your exact species.

api.oanor.com/reptile-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Spoke Length & Wheel API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Spoke Length & Wheel API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Spoke Length & Wheel API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Spoke Length & Wheel API?
Spoke Length & Wheel API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €4.35 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Spoke Length & Wheel API è conforme al GDPR?
Tutte le richieste a Spoke Length & Wheel API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/spokelength-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/spokelength-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/spokelength-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/spokelength-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.