Spec

Frammenti di codice

curl "https://api.oanor.com/welding-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/welding-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/welding-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/welding-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Risposta di esempio

Una risposta reale di questo endpoint, acquisita dall'ultimo health check.

{
    "data": {
        "notes": "Machine settings and consumables, NOT joint strength — for fillet-weld capacity use a weld-strength API. Steel filler density 0.284 lb/in³. Amperage is a mild-steel rule of thumb; deposition and gas are exact. Tune to your material, position and procedure.",
        "service": "welding-api",
        "endpoints": {
            "GET /v1/gas": "Shielding-gas used and cylinder duration from flow and arc time.",
            "GET /v1/meta": "This document.",
            "GET /v1/amperage": "Recommended amperage and electrode size from material thickness (mild steel).",
            "GET /v1/deposition": "MIG wire deposition rate, wire weight and wire/arc-time for a target deposit."
        },
        "description": "Welding settings & consumables: recommended amperage from thickness, MIG wire deposition & usage, and shielding-gas consumption."
    },
    "meta": {
        "timestamp": "2026-06-06T07:14:00.983Z",
        "request_id": "30430143-a0e0-4184-a43c-e1b7043a86d5"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}