#runtime

Battery and accumulator maths as an API, computed locally and deterministically from basic electrical relationships. The runtime endpoint estimates how long a battery will last under a given load — from the capacity (in mAh, Ah or Wh) and the load (in watts, or amps at a voltage), with adjustable depth-of-discharge and conversion efficiency — and reports the usable energy and the runtime in hours and minutes. The capacity endpoint converts a battery capacity between milliamp-hours, amp-hours, watt-hours, kilowatt-hours and joules at a given voltage. The pack endpoint builds a series/parallel cell pack (for example 3S2P): it returns the pack voltage, capacity and energy and the total cell count — series adds voltage, parallel adds capacity. The charge endpoint estimates the charge time from the capacity and the charge current (or a C-rate), with a charge efficiency and an optional from/to state-of-charge window. Everything is computed locally and deterministically, so it is instant and private. Real-world figures depend on temperature, age, C-rate and the discharge curve, so treat the results as estimates. Ideal for consumer-electronics and IoT tools, solar and off-grid sizing, drone and RC planning, UPS and backup-power sizing, and EV and battery-pack design. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 4 endpoints. This is battery maths; for Ohm's-law voltage/current/resistance use an electronics API.

api.oanor.com/battery-api