Staircase Calculator API
Staircase geometry as an API, computed locally and deterministically. The calc endpoint takes the total rise (floor-to-floor height) and works out the number of steps, the exact riser height, the tread depth, the total run, the stringer (hypotenuse) length and the stair angle, and checks the result against building-code limits and the Blondel comfort rule (2 × riser + tread ≈ 24–25 in). The check endpoint validates a given riser and tread against typical US IRC limits — maximum riser 7.75 in, minimum tread 10 in — and reports the angle and comfort. The stringer endpoint returns the stringer length and angle from a total rise and total run. Dimensions are handled internally in inches but accept inches, centimetres, millimetres and metres. Everything is computed locally and deterministically, so it is instant and private. Code limits are typical US IRC values — always confirm your local building code. Ideal for construction and carpentry tools, deck and home-improvement apps, and architecture and CAD software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is staircase geometry; for paint, tile and concrete quantities use a construction-calculator API and for roof pitch use a roofing API.
api.oanor.com/stair-api
