Spec

Codefragmenten

curl "https://api.oanor.com/flowrate-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/flowrate-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/flowrate-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/flowrate-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Voorbeeldrespons

Een echte respons van dit endpoint, vastgelegd bij de laatste health check.

{
    "data": {
        "note": "Internally SI (m³/s, m/s, m). Reynolds uses kinematic viscosity at ~20°C.",
        "fluids": [
            "water",
            "seawater",
            "air",
            "ethanol",
            "glycerin",
            "oilsae30",
            "oil",
            "milk",
            "honey"
        ],
        "service": "flowrate",
        "endpoints": {
            "/v1/flow": "Solve flow rate, velocity or pipe diameter from any two of the three.",
            "/v1/convert": "Convert a flow rate between L/s, L/min, m³/h, US gpm, cfm, cfs, etc.",
            "/v1/reynolds": "Reynolds number and flow regime from velocity, diameter and fluid."
        },
        "flow_units": [
            "m3s",
            "m3persec",
            "ls",
            "lpersec",
            "lmin",
            "lpermin",
            "lhr",
            "lh",
            "m3h",
            "m3hr",
            "m3min",
            "gpm",
            "gpmus",
            "gph",
            "cfm",
            "cfs",
            "gpmuk"
        ],
        "description": "Pipe-flow maths: flow rate / velocity / diameter (Q = A·v), Reynolds number & regime, and flow-rate unit conversion."
    },
    "meta": {
        "timestamp": "2026-06-04T01:59:18.797Z",
        "request_id": "fbaef258-edc8-43ff-82a3-d2b6b2691a7c"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}