Asymmetric tensions off-centre

Codefragmenten

curl "https://api.oanor.com/slackline-api/v1/off-center-load" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/slackline-api/v1/off-center-load", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/slackline-api/v1/off-center-load");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/slackline-api/v1/off-center-load",
    headers={"x-oanor-key": "oanor_test_..."}
)

Voorbeeldrespons

Een echte respons van dit endpoint, vastgelegd bij de laatste health check.

{
    "data": {
        "note": "Stand off-centre and the two halves carry different tensions: the horizontal pull is the same on both sides (H = weight × a × b ÷ (sag × span), with a and b the distances to each anchor), but the shorter, steeper segment runs at the higher tension because its angle is steeper. The short side is the one that fails first — which is why a highliner near an anchor stresses that leash and anchor harder than one standing in the middle.",
        "inputs": {
            "sag_m": 1.5,
            "load_kg": 80,
            "line_length_m": 25,
            "load_position_m": 10
        },
        "load_force_n": 784.53,
        "max_tension_n": 3173.2,
        "left_angle_deg": 8.531,
        "right_angle_deg": 5.711,
        "horizontal_tension_n": 3138.1,
        "left_segment_tension_n": 3173.2,
        "right_segment_tension_n": 3153.8
    },
    "meta": {
        "timestamp": "2026-06-07T08:17:55.775Z",
        "request_id": "c841e92f-2dd3-4186-8e16-bf0788161d00"
    },
    "status": "ok",
    "message": "Off-center load",
    "success": true
}