Optical Fiber API
Optical-fibre photonics maths as an API, computed locally and deterministically. The numerical-aperture endpoint computes a step-index fibre's numerical aperture NA = √(n1² − n2²) from the core and cladding refractive indices, the acceptance angle θa = arcsin(NA) — the half-angle of the cone of light the fibre can capture — the full acceptance cone and the relative index difference Δ = (n1 − n2)/n1. The v-number endpoint computes the normalized frequency V = 2π·a·NA/λ from the core radius, the numerical aperture (or the indices) and the wavelength, classifies the fibre as single-mode when V is below the 2.405 cutoff or multimode above it, and gives the cutoff wavelength for single-mode operation. The modes endpoint estimates the number of guided modes — about V²/2 for a step-index fibre and V²/4 for a graded-index one — and confirms single-mode operation below the cutoff. Core radius and wavelength are in metres (1310 nm = 1.31×10⁻⁶ m) and refractive indices are dimensionless. Everything is computed locally and deterministically, so it is instant and private. Ideal for telecom, photonics, datacenter, sensor and laser app developers, fibre-link and waveguide-design tools, and optics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is optical-fibre guiding; for thin lenses and mirrors use a lens API and for refraction at a surface a Snell API.
api.oanor.com/fiber-api
