Blended carbon-to-nitrogen ratio
API · /compost-api
Composting API
healthy
4,953 Subscribers
Composting maths as an API, computed locally and deterministically — the three numbers that decide whether a pile heats up and breaks down or sits there cold and smelly. The cn-ratio endpoint blends a mix to its carbon-to-nitrogen ratio: pass each material by weight with its dry-weight %C and %N as parallel comma-separated lists and it returns the total carbon and nitrogen masses and the blended C:N, with an assessment against the ideal 25–35:1 — ten parts dry leaves (50 %C, 1 %N) with ten parts grass clippings (45 %C, 2.5 %N) comes out at a near-perfect 27:1. The moisture endpoint works out the water to add to reach a target moisture (the pile should be a wrung-out-sponge 50–60 %): from the current mass and moisture it holds the dry matter constant, so 100 kg at 30 % needs about 56 kg of water to reach 55 %, and it flags a too-wet pile that needs drying instead. The mix endpoint gives the brown:green weight ratio to hit a target C:N from two materials' %C and %N — leaves and grass at a target 30:1 want about 1.5 parts browns to 1 part greens. Everything is computed locally and deterministically, so it is instant and private. Ideal for gardening and composting apps, master-composter and allotment tools, regenerative-ag and soil-health sites, and waste-diversion calculators. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. For material volume use a mulch API; for NPK application rates use a fertilizer API.
api.oanor.com/compost-api
API health
healthy- Uptime
- 100.00%
- Server probes · 24h
- Avg latency
- 96 ms
- Server probes · 24h
- Subscribers
- 4,953
- active
- Total calls
- 4
- last 7 days
Pricing
Pick a tier — billed monthly, cancel anytime.
Free
Free
- 450 calls / month
- 2 requests / second
- Hard cap (429 above quota, no overage)
- 450 calls/month
- 2 req/sec
- C:N + moisture + mix
- No credit card
Starter
€5.05 /month
- 12,500 calls / month
- 6 requests / second
- Hard cap (429 above quota, no overage)
- 12,500 calls/month
- 6 req/sec
- Multi-material blends
- Email support
Pro
€16.60 /month
- 80,000 calls / month
- 15 requests / second
- Hard cap (429 above quota, no overage)
- 80,000 calls/month
- 15 req/sec
- Garden-app pipelines
- Priority support
Mega
€49.90 /month
- 260,000 calls / month
- 36 requests / second
- Hard cap (429 above quota, no overage)
- 260,000 calls/month
- 36 req/sec
- Platform scale
- Dedicated SLA
Built by
Related APIs
Other APIs with overlapping tags.
Irrigation Design API
Irrigation-design maths as an API, computed locally and deterministically — the sprinkler numbers a landscaper, irrigation tech or gardener sizes a system with. The precip-rate endpoint gives the precipitation rate in inches per hour from the flow and spacing: PR = 96.25 × GPM per head ÷ the area each head waters (head spacing × row spacing in feet), where 96.25 is the in/hr one gallon-per-minute makes over a square foot — three-GPM heads on a 15 × 15 ft grid lay down about 1.28 in/hr. The runtime endpoint turns a target water depth into a run-time: depth ÷ precipitation rate, divided by the system efficiency because no system is perfectly even, so applying a half-inch at 1.28 in/hr takes about 23 minutes at full efficiency, longer with real-world uniformity. The zone endpoint sizes a valve zone: maximum heads = available flow ÷ each head's GPM, rounded down so you never starve the line — 13 GPM drives five 2.6-GPM heads with nothing to spare. Everything is computed locally and deterministically, so it is instant and private. Ideal for irrigation and landscaping apps, sprinkler-design and contractor tools, smart-controller schedulers, and garden-planning sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. For evapotranspiration or weather use a weather API; for material volume use a mulch API.
api.oanor.com/irrigation-api
Plant Spacing API
Plant-spacing and planting-density maths as an API, computed locally and deterministically. The grid endpoint works out how many plants fill an area in a square (rectangular) layout: from a spacing (one value, or separate row and in-row spacings) and either an area or a length and width, it returns the planting density per square metre, square foot, 1,000 ft², acre and hectare, an area-based plant estimate, and — when you give length and width — an exact edge-inclusive grid count with the number of rows and plants per row. The triangular endpoint does the same for an offset (hexagonal) layout, where rows sit spacing × √3/2 apart and fit about 15.47 % more plants than a square grid at the same spacing, and it reports the gain. The density endpoint converts a spacing into a planting density in several units, or works in reverse: give a number of plants and an area and it recommends the spacing that fills it. Lengths accept millimetres, centimetres, metres, inches or feet; area accepts m², ft², acres or hectares. Everything is computed locally and deterministically, so it is instant and private. Ideal for gardening and landscaping apps, agriculture and horticulture tools, nursery and farm planners, and reforestation calculators. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is planting layout and density; for fertilizer application rates use a fertilizer API and for mulch, soil and gravel quantities use a landscaping API.
api.oanor.com/plantspacing-api
Fertilizer Calculator API
Fertilizer maths as an API, computed locally and deterministically. The rate endpoint works out how much fertilizer product to apply to hit a target nitrogen rate over an area: from the N-P-K analysis (such as 10-10-10 or 20-5-10), a target pounds of nitrogen per 1000 ft² (or per 100 m²) and the area, it returns the product weight and the pounds of nitrogen, phosphate and potash applied. The nutrients endpoint reports the pounds of nitrogen, P₂O₅ and K₂O — and the elemental phosphorus and potassium — in a bag of a given weight and analysis. The coverage endpoint works out how much area a bag covers at a target nitrogen rate. N-P-K are percent by weight; phosphorus is reported as P₂O₅ and potassium as K₂O following the label convention, with the elemental amounts alongside (P₂O₅ × 0.4364, K₂O × 0.8301). Everything is computed locally and deterministically, so it is instant and private. Ideal for lawn-care and gardening apps, agriculture and turf tools, and landscaping and quoting software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is fertilizer rate maths; for mulch, gravel and topsoil quantities use a landscaping API.
api.oanor.com/fertilizer-api
Landscaping Material API
Landscaping material estimating as an API — the "how much mulch, soil or gravel do I need" maths, computed locally and deterministically. The coverage endpoint works out the volume to cover an area at a depth — in cubic yards, cubic metres, cubic feet and litres — and, given a material or a custom bulk density, the weight in US tons, tonnes and kilograms, plus the number of bags for a given bag size. The area can be entered directly or as a rectangular, circular or triangular bed, and depth in inches, centimetres, feet or metres. The depth endpoint is the inverse: it works out the depth that an available volume (or a number of bags) gives over an area — handy when you already have a load of material. The material endpoint is a reference of typical bulk densities (mulch, compost, topsoil, gravel, sand) and how much area one cubic yard covers at 1 to 4 inch depths. Everything is computed locally and deterministically, so it is instant and private. Densities are typical values and bulk material varies with moisture and compaction, so order around 5–10% extra. Ideal for landscaping and garden-centre tools, hardscaping and bulk-material retailers, and DIY and yard-project planners. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is landscaping-material estimating; for paint, tiles, concrete and bricks use a construction-calculator API.
api.oanor.com/landscape-api
Frequently asked questions
Quick answers about pricing, quotas, and integration.
How do I get an API key for Composting API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call Composting API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for Composting API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does Composting API cost?
Composting API has a free tier with 100 calls / month. Paid plans start at €5.05 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is Composting API GDPR-compliant?
All requests to Composting API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.
Pick an endpoint from the list on the left to see its details and try it.
Code snippets
Sign up to get an API key, then call any path under your slug.
curl https://api.oanor.com/compost-api/SOME_PATH \
-H "x-oanor-key: oanor_test_..."const res = await fetch("https://api.oanor.com/compost-api/SOME_PATH", {
headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();$ch = curl_init("https://api.oanor.com/compost-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);import requests
r = requests.get(
"https://api.oanor.com/compost-api/SOME_PATH",
headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())Ratings
Sign in to rate.
No reviews yet.
Discussion
Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.
Sign in to start a thread or reply.
Sign inNew thread
📌 Pinned
🔒 Locked
·
·
·
-
Provider answer
🔒 This thread is locked — no new replies.
-
·
- No threads yet — start the discussion.
Support
Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.
Sign in to open a support ticket.
Sign inOpen new ticket
Describe what you need help with. The provider team gets an email and replies on the ticket page.
-
·
Urgent - No tickets yet for this API.