Spec

Code snippets

curl "https://api.oanor.com/resin-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/resin-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/resin-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/resin-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Example response

A real response from this endpoint, captured by the latest health check.

{
    "data": {
        "notes": "Mix amounts stay in your unit (ml/g/fl oz) — use the label's ratio (volume e.g. 2:1, or weight e.g. 100:45). Coverage and mould volume in metric or US units; mass uses density (cured epoxy ≈ 1.1 g/cm³). For pot life and cure schedule follow the product data sheet.",
        "service": "resin-api",
        "endpoints": {
            "GET /v1/mix": "Split a two-part resin by its mix ratio from one known quantity.",
            "GET /v1/meta": "This document.",
            "GET /v1/coverage": "Resin volume to coat a flat area at a thickness.",
            "GET /v1/moldfill": "Resin to fill a box/cylinder/sphere/cone mould, minus embedded objects."
        },
        "description": "Casting/epoxy resin maths: two-part mix by ratio, flood-coat coverage volume, and mould fill volume for common shapes."
    },
    "meta": {
        "timestamp": "2026-06-06T07:14:02.840Z",
        "request_id": "5af8adff-90ec-4537-bcef-f2ba5bacd2d8"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}