Water boiling point at pressure
API · /vacuum-api
Vacuum Technology API
healthy
3,797 Subscribers
Vacuum-technology maths as an API, computed locally and deterministically — the pump-down, boiling and pressure numbers a lab tech, process engineer or vacuum hobbyist works to. The pumpdown endpoint gives the ideal time to evacuate a chamber, t = (volume ÷ pump speed) × ln(start ÷ target pressure) — a 10-litre chamber on a 5 L/s pump drops from 1000 to 1 mbar in about 14 seconds in theory, though outgassing and falling pump speed stretch the real low-pressure stage. The boiling-point endpoint gives the temperature water boils at under reduced pressure from the Antoine equation: about 100 °C at sea level, but only ~52 °C at 100 mbar and ~46 °C at 100 mbar — the physics behind vacuum degassing, freeze-drying and high-altitude cooking. The level endpoint converts a pressure across the common vacuum units (mbar, Torr/mmHg, Pa, kPa, inHg, atm, psi), reports the percent vacuum relative to atmosphere, and names the regime — rough, medium, high or ultra-high vacuum — so you know which pump and gauge the job needs. Everything is computed locally and deterministically, so it is instant and private. Ideal for vacuum-lab and process apps, pump-sizing and degassing tools, semiconductor and coating calculators, and physics teaching. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. Ideal estimates — real systems are slowed by outgassing and leaks.
api.oanor.com/vacuum-api
API health
healthy- Uptime
- 100.00%
- Server probes · 24h
- Avg latency
- 96 ms
- Server probes · 24h
- Subscribers
- 3,797
- active
- Total calls
- 52
- last 7 days
Pricing
Pick a tier — billed monthly, cancel anytime.
Free
Free
- 470 calls / month
- 2 requests / second
- Hard cap (429 above quota, no overage)
- 470 calls/month
- 2 req/sec
- Pump-down + boiling + level
- No credit card
Starter
€5.55 /month
- 12,600 calls / month
- 6 requests / second
- Hard cap (429 above quota, no overage)
- 12,600 calls/month
- 6 req/sec
- Antoine boiling, all units
- Email support
Pro
€17.80 /month
- 80,000 calls / month
- 15 requests / second
- Hard cap (429 above quota, no overage)
- 80,000 calls/month
- 15 req/sec
- Lab & process pipelines
- Priority support
Mega
€52.80 /month
- 260,000 calls / month
- 36 requests / second
- Hard cap (429 above quota, no overage)
- 260,000 calls/month
- 36 req/sec
- Platform scale
- Dedicated SLA
Built by
Related APIs
Other APIs with overlapping tags.
Hydrostatic Pressure API
Fluid-statics maths as an API, computed locally and deterministically. The pressure endpoint computes the pressure at a depth in a fluid — the gauge pressure ρ·g·h and the absolute pressure (gauge plus atmospheric) — in pascals, kilopascals, bar, psi and atmospheres, for water, seawater, oil, mercury and more, or a custom density; depths accept metres, feet or centimetres, which makes it handy for diving (about 10 m of seawater adds one atmosphere). The force endpoint computes the resultant hydrostatic force on a submerged vertical rectangular surface — an aquarium wall, a tank side, a dam face or a flood gate — as F = ρ·g·h_c·A from its width and the top and bottom depths, and gives the depth of the centre of pressure, which sits below the centroid. The buoyancy endpoint applies Archimedes' principle, F_b = ρ_fluid·g·V, to give the buoyant force and the displaced mass, and — if you supply the object's density or mass — tells you whether it floats or sinks and what fraction sits below the waterline. Everything is computed locally and deterministically, so it is instant and private. Ideal for civil and marine engineering tools, diving and aquarium apps, tank and dam design, and physics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is fluid statics; for pump power and head use a pump API and for pipe flow rate use a pipe-flow API.
api.oanor.com/hydrostatic-api
Isotopes API
Atomic isotope reference data as an API, built on the NIST Atomic Weights and Isotopic Compositions. For every known nuclide: its element (atomic number Z and symbol), mass number, relative atomic mass, natural isotopic composition (abundance) and the element's standard atomic weight. Look an isotope up by label (C-12, U-238) or by symbol + mass, list every isotope of an element, rank isotopes by mass or natural abundance, or search. A precise physics and chemistry reference for science, education, lab and engineering apps. Distinct from element-level data.
api.oanor.com/isotopes-api
Hot Air Balloon Lift API
Hot-air-balloon lift maths as an API, computed locally and deterministically — the thermal-lift, envelope-temperature and air-density numbers a balloon pilot, designer or physics teacher works a flight out with. The lift endpoint gives the buoyant lift from heating the air: gross lift = envelope volume × (outside air density − inside air density), the densities from the ideal-gas law — a 2,500 m³ envelope at 100 °C on a 15 °C day lifts about 698 kg gross, from which you subtract the envelope, basket, burner and fuel for the payload, and the hotter the air and colder the day the more it lifts. The required-temp endpoint inverts it: to carry a target lift the inside air must reach a particular density and so a particular temperature, with a check that it stays under the ~120 °C that nylon envelopes can take — the everyday pre-flight question of whether the balloon can lift today's crew and fuel. The air-density endpoint gives the moist-air density ρ = (P − 0.378·Pv) ÷ (R·T), and explains the counter-intuitive fact that humid air is LESS dense than dry air, slightly cutting the lift. Everything is computed locally and deterministically, so it is instant and private. Ideal for ballooning and aviation tools, STEM and physics-education apps, and buoyancy calculators. Pure local computation — no key, no third-party service, instant. Idealised dry-lift model. 3 compute endpoints. For Archimedes flotation in water use a buoyancy API; for party-balloon helium lift a balloon API.
api.oanor.com/hotairballoon-api
Center of Mass API
Centre-of-mass and barycentre mechanics as an API, computed locally and deterministically. The point-masses endpoint computes the centre of mass of a system of point masses in one, two or three dimensions, applying x_com = Σ(m_i·x_i)/Σm_i to each axis from a list of masses and their x (and optional y and z) coordinates — masses of 1, 2 and 3 at positions 0, 1 and 2 give a centre of mass at 1.333, and four equal masses at the corners of a square sit at its centre. The two-body endpoint computes the barycentre of two masses separated by a distance, r1 = d·m2/(m1+m2) from the first body, which always lies closer to the heavier one — for the Earth-Moon system the barycentre is about 4 670 km from Earth’s centre, still inside the planet. Lists may be passed as comma-separated values (masses=1,2,3&x=0,1,2) or as JSON arrays in a POST body, and units are consistent and unit-agnostic. Everything is computed locally and deterministically, so it is instant and private. Ideal for physics, engineering-statics, astronomy, robotics, game-physics and mechanics-education app developers, balance-point and barycentre tools, and simulation software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 2 endpoints. This is the centre of mass; for the rotational moment of inertia use a moment-of-inertia API.
api.oanor.com/centerofmass-api
Frequently asked questions
Quick answers about pricing, quotas, and integration.
How do I get an API key for Vacuum Technology API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call Vacuum Technology API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for Vacuum Technology API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does Vacuum Technology API cost?
Vacuum Technology API has a free tier with 100 calls / month. Paid plans start at €5.55 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is Vacuum Technology API GDPR-compliant?
All requests to Vacuum Technology API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.
Pick an endpoint from the list on the left to see its details and try it.
Code snippets
Sign up to get an API key, then call any path under your slug.
curl https://api.oanor.com/vacuum-api/SOME_PATH \
-H "x-oanor-key: oanor_test_..."const res = await fetch("https://api.oanor.com/vacuum-api/SOME_PATH", {
headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();$ch = curl_init("https://api.oanor.com/vacuum-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);import requests
r = requests.get(
"https://api.oanor.com/vacuum-api/SOME_PATH",
headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())Ratings
Sign in to rate.
No reviews yet.
Discussion
Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.
Sign in to start a thread or reply.
Sign inNew thread
📌 Pinned
🔒 Locked
·
·
·
-
Provider answer
🔒 This thread is locked — no new replies.
-
·
- No threads yet — start the discussion.
Support
Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.
Sign in to open a support ticket.
Sign inOpen new ticket
Describe what you need help with. The provider team gets an email and replies on the ticket page.
-
·
Urgent - No tickets yet for this API.