MIG wire deposition + usage

Code snippets

curl "https://api.oanor.com/welding-api/v1/deposition" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/welding-api/v1/deposition", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/welding-api/v1/deposition");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/welding-api/v1/deposition",
    headers={"x-oanor-key": "oanor_test_..."}
)

Example response

A real response from this endpoint, captured by the latest health check.

{
    "data": {
        "note": "Deposition = wire feed speed × wire weight per inch × 60 × efficiency. Wire weight/inch = (π/4 · d²) × 0.284 lb/in³ for steel. Solid MIG deposits ~98 % of the wire fed; flux-cored and spatter lower it.",
        "inputs": {
            "efficiency": 0.98,
            "wire_feed_ipm": 300,
            "wire_diameter_in": 0.035
        },
        "deposit_lb": 5,
        "arc_time_hr": 1.037,
        "wire_lb_per_ft": 0.0033,
        "wire_needed_lb": 5.102,
        "wire_fed_lb_per_hr": 4.918,
        "deposition_rate_lb_per_hr": 4.82
    },
    "meta": {
        "timestamp": "2026-06-06T07:14:00.800Z",
        "request_id": "6018cc76-c3f9-4bda-ad61-013a71e8e42a"
    },
    "status": "ok",
    "message": "Deposition",
    "success": true
}