Mobile Crane Lift API
Mobile-crane lift-planning maths as an API, computed locally and deterministically — the load-moment, tipping-capacity and outrigger-pad numbers a crane operator, lift planner or rigging engineer checks a pick with. The load-moment endpoint gives the load × its working radius (the horizontal distance from the slew centre to the hook), the single figure a crane's rated-capacity limiter watches: a 5-tonne load at 8 m is a 40 tonne-metre moment, the same as 10 tonnes at 4 m, which is why chart capacity falls steeply as the boom luffs out — moment, not weight, tips the crane. The capacity endpoint gives a simplified tipping balance about the fulcrum: the load that just tips = counterweight × its radius ÷ the load radius, and the rated safe load is a stability fraction of that (~75 % on outriggers, ~66 % on crawlers per the standards) — a teaching/sanity figure that ignores the boom and superstructure, never a substitute for the load chart. The outrigger-pad endpoint sizes the float: required pad area = the outrigger leg load ÷ the soil's allowable bearing pressure (and the side of a square mat), since overloading weak ground is a leading cause of overturns — a 30-tonne leg on 200 kPa wants about a 1.2 m square mat. Everything is computed locally and deterministically, so it is instant and private. Ideal for lift-planning and rigging tools, construction and crane-operations apps, and site-safety utilities. Pure local computation — no key, no third-party service, instant. Simplified — always use the manufacturer load chart. 3 compute endpoints. For sling and WLL loads use a rigging API.
api.oanor.com/crane-api
